The order of the pins, for the different types of elements is shown in the following table. For each pin is given the number allowed for the pin and enclosed in round brackets the names allowed for that pin, the names are listed in descending order of priority. The pin is searched first by name and then by number. For example, for the corresponding node the cathode of a diode is first searched for the pin named '2', if it does not exist, the pin named 'K' is searched for and if it is missing the pin named 'C' and finally the pin number 2 is searched.
| Parameter | Description | |
|---|---|---|
| SPICE prefix | Device | Pin |
| B | Non-linear Dependent Source | 1 (1,+) 2 (2,-) |
| C | Capacitor | 1 (1,+) 2 (2,-) |
| D | Diode | 1 (1,A) 2 (2,K,C) |
| E | Linear Voltage-controlled Voltage Source | 1 (1,+) 2 (2,-) 3 (3,C+) 4 (4,C-) |
| F | Linear Current-controlled Current Source | 1 (1,+) 2 (2,-) |
| G | Linear Voltage-controlled Current Source | 1 (1,+) 2 (2,-) 3 (3,C+) 4 (4,C-) |
| H | Linear Current-controlled Voltage Source | 1 (1,+) 2 (2,-) |
| I | Independent Current Source | 1 (1,+) 2 (2,-) |
| J | JFET | 1 (1,D) 2 (2,G) 3 (3,S) |
| L | Inductor | 1 (1,+) 2 (2,-) |
| M | MOSFET | 1 (1,D) 2 (2,G) 3 (3,S) 4 (4,B) |
| O | Lossy Transmission Line | 1 (1) 2 (2) 3 (3) 4 (4) |
| Q | Bipolar Junction Transistor (BJT) | 1 (1,C) 2 (2,B) 3 (3,E) 4 (4,S) |
| R | Resistor | 1 (1) 2 (2) |
| S | Voltage-controlled Switch | 1 (1) 2 (2) 3 (3,C+) 4 (4,C-) |
| T | Lossless Transmission Line | 1 (1) 2 (2) 3 (3) 4 (4) |
| U | Uniform Distributed RC Transmission Lines | 1 (1) 2 (2) 3 (3) |
| V | Independent Voltage Source | 1 (1,+) 2 (2,-) |
| W | Current-controlled Switch | 1 (1) 2 (2) |
| X | Subcircuit Calls | 1 (1) 2 (2) 3 (3) ... |
| Z | MESFET | 1 (1,D) 2 (2,G) 3 (3,S) |