Set the parameters for the paste mask.
 Syntax: |
|---|
|
FWizPadStyle.SetPasteMask(mode = FWiz.PASTEMASK_STANDARD, exp = -0.025)
|
Parameters
| Parameter |
Description |
| mode |
Set the mode for the top layer of the PCB. Specify one of the following values:
| FWiz.PASTEMASK_STANDARD |
Indicates that for this type of pad the shape for the paste mask is adjusted by the value set in the Project. |
| FWiz.PASTEMASK_FREE |
Indicates that welding paste must not be applied to this type of pad. |
| FWiz.PASTEMASK_COVERED |
Indicates that for this type of pad the shape for applying the solder paste corresponds to the shape of the pad,
expanded according to the value specified for the parameter Expansion. Typically, the shape of the solder paste is smaller than that of the pad. |
|
| exp |
Specify how much the pad outline should be expanded to create the template for the solder paste.
Typically, the shape of the solder paste is smaller than that of the pad. |
Return Value
If the operation ends correctly, it returns true otherwise it returns false.
Example
|
|
 Copy code
|
|
See also
