Initialize the style to define a pad with a hole by specifying the diameter of the pad and the hole.
 Syntax: |
|---|
|
FWizPadStyle.InitPadFromDiameter(padDiameter, holeDiameter, holeLength=0, xRatio=0, plated=true, shapeFactor=1)
|
Parameters
| Parameter |
Description |
| padDiameter |
Specify the pad diameter. |
| holeDiameter |
Specify the hole diameter. |
| holeLength |
To create a slot with rounded ends, specify its length. |
| xRatio |
Determines the increase in size along the X axis of the pad with respect to the Y axis. |
| plated |
Specify the hole type. Enter true if the hole is plated otherwise false. |
| shapeFactor |
Specify the shape of the pad by defining whether the corners should be straight, rounded or beveled. Specify the shape of the pad as follows:
| >0 and <=1 |
Corners are rounded. The value of shapeFactor specifies the rounding percentage of all four edges of the pad. |
| =0 |
Angles are 90 degrees. |
| >=-1 and < 0 |
The corners are beveled. The value of the shapeFactor specifies the percentage of bevel of all four corners of the pad. |
|
Return Value
If the operation ends correctly, it returns true otherwise it returns false.
Example
|
|
 Copy code
|
|
See also
