-
Choose the PCB » Track » Arc » Center, Radius, Start Angle, End Angle command or click the
tool in the toolbar.
-
Specify the center.
-
Specify the radius.
-
Specify the starting angle.
-
Specify the final angle.
The arc can be created clockwise or counterclockwise by pressing the TAB key.
To create a closed arc at the center choose the Closed center command in the tool menu.
To create a arc closed to the chord choose the Closed to the chord command in the tool menu.
If the track starts on a pad, the routing style set for the class of the connection to which the pad belongs is used, otherwise the current routing style is used.
For the insertion of Vias and Jumpers the layer pairing defined in the dialog PCB Layer Stackup is used.
Commands and options
To repeat the command press the SPACEBAR.
To close the tool without drawing the track press ESC.
To specify the coordinates of the points or the value of the lengths you can use the pointing device or you can press INS to open the dialog box for entering values.