The objects Sheet Port shall be used for signal input and output. Each Sheet Port must correspond to a Port on the page connected to the Sheet object.
To add a Sheet Port
-
Choose the Schematic » Sheet » Sheet Port command or click the
tool in the toolbar.
The Place Sheet Port dialog box opens where you can specify the number, spacing and name of
ports.
-
Place the objects on the sheet and click to insert them into the drawing.
-
The Place Sheet Port dialog appears again, click on Cancel to finish the command.
 Nota: |
|---|
When the Sheet Ports are within the perimeter of the Sheet object, they are automatically hooked to the outer edge of the Sheet object. |
Commands and options
To add more sheet ports press the SPACEBAR.
To close the tool without adding the Sheet Ports press ESC.
To display the tool menu, which has commands for rotating and reflecting objects, press the right mouse button.