Angular dimensions measure the angle between three points. The dimension line forms an arc drawn counterclockwise from the first vertex to the second. This command allows you to draw a single vertical dimension. When you have finished drawing the dimension, the tool closes automatically.
To draw a dimension
-
Choose the Graphics » Dimension » Angular command or click the
tool in the toolbar.
Specify the center of the Angle.
-
Specify the origin point of the first extension line. You can use the pointing device or you can open the dialog box for entering values. In the dialog box, the coordinates of the endpoint can be specified as follows:
By typing the point coordinates directly.
By specifying the offset from the starting point.
Specifying the inclination of the line relative to the horizontal axis and its length.
-
Specify the point of origin of the second extension line. You can use the pointing device or you can open the dialog box for entering values. In the dialog box, the coordinates of the endpoint can be specified as follows:
By typing the point coordinates directly.
By specifying the offset from the starting point.
Specifying the inclination of the line relative to the horizontal axis and its length.
Adjust the height of the dimension line.
The dimension is created with the current Style.
Commands and options
To start a new dimension, press the SPACEBAR.
To close the tool without drawing the dimension, press ESC.
-
To change the shape of the dimension line, Press TAB.
To specify the coordinates of the points or the value of the lengths you can use the pointing device or you can press INS to open the dialog box for entering values.